高层公寓建筑防火设计探讨

高层公寓的火灾特点不同于普通的高层住宅，其火灾危险性高于普通住宅。分析了高层公寓的火灾特点，并从消防车作业面、安全疏散、防火分隔、防排烟、灭火设施、内装修等方面提出了高层公寓防火设计应注意的问题。     

二维超声速空气引射器启动特性试验研究

超声速引射器是高空模拟试车台的重要组件,在发动机启动前利用引射器对试验舱预抽真空,可避免发动机启动初始时刻燃气漏入试验舱造成燃气在发动机中分离,对获取发动机在高空环境下的完整推力特性具有重要意义。而该工况下超声速引射器的启动过程是引射器工作过程中最为恶劣的工况,设计不合理的引射器会导致启动压力过高甚至不能实现启动。建立了缩比超声速空气引射器试验台对超声速引射器的启动特性进行研究,采用压力测量方法结合纹影技术对超声速引射器处于极限启动压比时的流场进行了描述,研究结果表明混合室收缩比越小,引射器极限启动压比越低。同时给出了定位超声速引射器不启动原因的判据:当引射器不启动是由引射总压不足引起时,盲腔压力在引射总压提高时降低,并在临界启动状态下达到最小值;而由混合室收缩比过小导致的引射器不启动在引射总压提高时盲腔压力单调上升。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

改进的Euler方法应用于非线性方程求根

本文通过引入动力系统，将改进的Euler方法应用于非线性方程求根问题，给出非线性方程求根的预估-再校正迭代格式，证明了该格式至少二阶收敛并可以调节参数达到超收敛。最后给出数值实验，数值结果验证了算法的有效性。     

电子时间引信检测仿真试验研究

为提高电子时间引信的检测能力，介绍了电子时间引信检测仿真试验，分析了仿真试验的原理，给出了检测仿真试验的试验方法。经实际检测表明，该检测仿真试验能够安全可靠地完成电子时间引信的日常检测任务。     

基于先验知识的降秩STAP方法研究

提出了一种基于杂波先验知识的降秩(RR)空时自适应处理(STAP)方法——KA-RR法,该方法首先利用载机平台运动参数、雷达系统参数及地形、地貌参数等先验知识构建机载雷达杂波模型,然后通过该模型对机载雷达杂波数据进行预白化处理,最后利用降秩STAP方法自适应抑制剩余杂波。仿真结果表明,相对于传统的降秩STAP方法,KA-RR方法具有更好的杂波抑制性能和更强的鲁棒性。     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于分数阶傅立叶变换的ARM检测技术

分数阶傅立叶变换(FRFT)是傅立叶变换的广义形式,对线性调频(LFM)信号具有很好的能量积累作用.针对反辐射导弹(ARM)雷达回波信号的线性调频特性,提出了一种基于FRFT的反辐射导弹检测方法,并根据ARM信号的调频特性将FRFF局域化,缩小了峰值搜索区域,提高了检测效率.仿真实验表明该方法能够在高斯、非高斯分布杂波环境下有效地检测ARM信号.     

基于自适应累量算法的舰船轴频电场信号检测方法

提出一种新的舰船轴频电场信号检测方法.该方法利用高阶累量对高斯噪声的抑制作用,首先使用基于自适应累量算法的FIR滤波器对接收信号进行滤波消噪处理,以提高信噪比;然后再对滤波输出信号进行滑动功率谱检测.实测数据处理结果表明了该方法的稳健性和有效性.     

海洋环境中基于WVD的LFM信号检测方法

海洋环境中弱信号的谱与海杂波的谱相混叠 ,目标和背景的位置差异很小 ,经典的频域或空域处理对海杂波中弱信号的检测难以奏效。鉴于Wigner-Ville分布 (WVD)对线性调频信号 (LFM )具有时频聚集性这一特点 ,提出了一种海洋环境中基于WVD的LFM信号检测方法。利用雷达采集的真实海杂波数据 ,在不同信杂比的条件下 ,研究了该方法与经典频域法在信号检测中的差别。通过实验分析 ,与经典方法相比 ,该方法具有明显的优越性 ,且信杂比达到 -14 . 3dB时 ,其仍能很好地对信号进行检测。